Choose the Right Surface
When it comes to sticking Indigenous fridge magnets on metal or magnetic surfaces, it is important to choose the right surface. Not all metals are created equal and not all magnetic surfaces have the same strength. The best types of metal surfaces for sticking fridge magnets are those that are flat, clean and smooth. These include stainless steel fridges, aluminum appliances, and enamel-coated refrigerators.
On the other hand, rough or textured metal surfaces such as brushed nickel or copper may not hold onto fridge magnets securely due to their uneven texture which makes them unsuitable for this purpose.
Additionally, some magnetic surfaces may be too weak to support a heavy magnet or might lose their magnetism over time. In order to ensure that your Indigenous-themed magnet stays in place on your fridge or any other magnetic surface you intend to use it on; testing its strength using a regular household magnet can help determine if the intended location is suitable.
Clean and Dry the Surface
Before sticking the Indigenous fridge magnet on any metal or magnetic surface, it is crucial to clean and dry the area thoroughly. Any dirt, dust, or moisture present on the surface can negatively affect the magnet's adhesion.
To begin with, gather all necessary cleaning materials such as a damp cloth or sponge and mild soap. Avoid using harsh chemicals that may damage both the surface and magnet. Ensure that you have wiped off any existing magnets before proceeding.
Start by wiping down the chosen surface with a damp cloth to remove any visible debris or grime. Pay close attention to corners and crevices where dirt tends to accumulate. If necessary, use a soft-bristled brush to dislodge stubborn particles.
Next, apply a small amount of mild soap onto your cloth or sponge and gently scrub away any remaining residue from the surface. Be careful not to oversaturate your cleaning material with water as this may leave behind unwanted streaks.
Afterward, rinse off your cleaning tool in running water until all traces of soap are removed then wring out excess moisture from it before wiping down the cleaned area again for one last time.
Lastly, ensure that you let the spot air-dry completely before attaching an Indigenous-themed fridge magnet onto it since even slight humidity could hamper its adhesive properties causing it not stick properly which results in falling off after some time ultimately leading to disappointment among users.
Peel off the Protective Film
Before sticking the Indigenous fridge magnet on any metal or magnetic surface, it is crucial to peel off the protective film. This film protects the adhesive side of the magnet during shipping and handling. To peel off this film safely and easily, locate one corner of the protective film and slowly pull it back until it comes completely off. It's essential to be gentle in this process as pulling too quickly can damage both the film and the magnet itself.
When peeling off the protective layer, avoid touching or rubbing against its adhesive side with your fingertips or nails because oils from fingers might get transferred onto them which could affect their ability to stick properly later on. Instead, hold onto a corner of either side when removing this covering material.
It is important not to touch these areas for two reasons: first, they may become dirty; secondly, some adhesives are very sensitive to contamination by skin oil that will diminish their holding power over time. Therefore keeping your hands away from them while you remove any wrapping materials will ensure that you have no issues getting your Indigenous-themed magnets securely attached where you want them without having any problems arise down-the-line due simply being careless at an early stage in installation!
Align and Press the Magnet Firmly onto the Surface
Once you have chosen the perfect spot for your Indigenous-themed fridge magnet, it's time to align and press it firmly onto the surface. This step is crucial as it ensures maximum adhesion and prevents air bubbles or uneven surfaces from forming underneath.
To begin, hold the magnet by its edges and carefully position it onto the metal or magnetic surface of your fridge. Take a moment to adjust its placement until you are satisfied with its location.
Next, using gentle pressure, start pressing down on one corner of the magnet while making sure that it remains in place. Slowly work your way towards the opposite corner while continuing to apply pressure evenly across the entire surface area of the magnet.
As you do this, make sure to avoid trapping any pockets of air between the magnet and surface as they can weaken adhesion over time. If necessary, use a flat object such as a credit card or ruler to help smooth out any bumps or ridges that may form during application.
Finally, once you have pressed down on all corners of your Indigenous-themed fridge magnet with sufficient force and ensured that there are no air bubbles trapped beneath it - congratulations! You have successfully applied an eye-catching addition to your kitchen decor!
Remember that proper alignment and firm pressing will ensure long-term durability for your new decorative item. By following these simple steps before displaying your beloved Indigenous artwork on any metal or magnetic surface within reach at home today!
Enjoy Your Colorful and Meaningful Decoration
After following the simple steps outlined in this post, you are now ready to proudly display your Indigenous-themed fridge magnets on any metal or magnetic surface. Not only do these magnets add a pop of color and personality to your kitchen decor, but they also serve as a powerful symbol of Canada's rich cultural diversity. Each magnet represents the beauty and significance of Indigenous art, reminding us of our country's history and heritage. So go ahead and enjoy your new colorful and meaningful decoration - it is sure to be a conversation starter for all who see it!